MikroTik RouterOS 6.46 6.46

MAJOR CHANGES IN v6.46:
———————-
!) lora – added support for LoRaWAN low-power wide-area network technology for MIPSBE, MMIPS and ARM;
!) package – accept only packages with original filenames (CVE-2019-3976);
!) package – improved package signature verification (CVE-2019-3977);
!) security – fixed improper handling of DNS responses (CVE-2019-3978, CVE-2019-3979);
———————-
Changes in this release:
*) backup – fixed automatic backup file generation when configuration reset by button;
*) backup – store automatically created backup file in “flash” directory;
*) bonding – correctly remove HW offloaded bonding with ARP monitoring;
*) bonding – properly handle MAC addresses when bonding WLAN interfaces;
*) bridge – disable/enable bridge port when setting bpdu-guard;
*) bridge – do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged;
*) bridge – do not add dynamically VLAN entry when changing “pvid” property for non-vlan aware bridge;
*) bridge – include whole VLAN-id in DHCP Option 82 message;
*) btest – removed duplicate “duration” parameter;
*) capsman – fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
*) capsman – fixed channel auto reselection;
*) capsman – fixed MAC address detection for “common-name” parameter in certificate requests;
*) capsman – improved DFS channel switching when radar detected;
*) capsman – improved radar detection algorithm;
*) ccr – improved general system stability;
*) certificate – added progress bar when creating certificate request;
*) certificate – added support for certificate request signing with EC keys;
*) certificate – allow specifying “file-name” parameter for export (CLI only);
*) certificate – allow specifying “name” parameter for import (CLI only);
*) certificate – improved CRL updating process;
*) certificate – removed “key-size” parameter for “create-certificate-request” command;
*) chr – added support for Azure guest agent;
*) console – added bitwise operator support for “ip6” data type;
*) console – fixed “address” column width when printing DHCPv4 leases;
*) console – fixed IP conversion to “num” data type;
*) console – fixed “tobool” conversion;
*) console – properly detect IPv6 address as “ip6” data type;
*) crs1xx/2xx – allow to set trunk port as mirroring target;
*) crs3xx – correctly handle L2MTU change;
*) crs3xx – do not send pause frames when ethernet “tx-flow-control” is disabled on CRS326/CRS328/CRS305 devices;
*) crs3xx – improved interface initialization;
*) crs3xx – improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
*) crs3xx – improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
*) crs3xx – remove previously set mirror-source property before changing it;
*) defconf – fixed default configuration loading on RBmAPL-2nD (introduced in v6.45);
*) defconf – require “policy” permission to print default configuration;
*) dhcpv4-client – allow empty “dhcp-options” parameter when adding new client;
*) dhcpv4-client – fixed “dhcp-options” parameter setting when adding new client;
*) dhcpv4-server – improved stability when RADIUS Interim update is sent;
*) dhcpv6-client – fixed timeout when doing rebind;
*) dhcpv6-client – properly update bind time when unused prefix received from the server;
*) dhcpv6-client – properly update IPv6 address on rebind;
*) dhcpv6-server – fixed logged error message when using “address-pool=static-only”;
*) dhcpv6-server – ignore prefix-hint from client’s DHCPDISCOVER if static prefix received from RADIUS;
*) dhcpv6-server – include “User-Name” parameter in accounting requests;
*) dhcpv6-server – made “calling-station-id” contain MAC address if DUID contains it;
*) dot1x – added “reject-vlan-id” server parameter (CLI only);
*) dot1x – added support for dynamic switch rules from RADIUS;
*) dot1x – added support for “mac-auth” authentication type (CLI only);
*) ethernet – automatically detect interface when using IP address for power-cycle-ping;
*) ethernet – do not enable interface after reboot that is already disabled;
*) ethernet – send requests only from ethernet interface when using MAC address for power-cycle-ping;
*) export – always export “ssid” value for w60g interfaces;
*) fetch – do not allocate extra 500KiB on SMIPS;
*) fetch – improved stability when processing large output data;
*) gps – use “serial1” as default port on RBLtAP-2HnD;
*) hotspot – fixed non-local NAT redirection to port TCP/64873;
*) hotspot – fixed RADIUS CoA “address-list” update;
*) ike1 – fixed minor spelling mistake in logs;
*) ike2 – improved CHILD SA rekey process with Apple iOS 13;
*) ike2 – improved stability when retransmitting first packet as responder;
*) ipsec – added “error” topic for identity check failure logging messages;
*) ipsec – fixed DNS resolving when domain has only AAAA entries;
*) ipsec – fixed policy “sa-src-address” detection from “local-address” (introduced in v6.45);
*) ipv6 – changed “advertise-dns” default value to “yes”;
*) led – fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD;
*) log – increased log message length limit to 1024 characters;
*) lte – added support for D402 modem;
*) lte – added support for LM960A18;
*) lte – added support for Telit LM960 and LE910C1 modems;
*) lte – do not allow setting 3G and GSM modes on LTE only modems;
*) lte – fixed band setting on R11e-4G;
*) lte – fixed network registration on R11e-LTE-US;
*) lte – fixed Sierra WP7601 driver loading;
*) lte – fix “operator” names not being displayed properly;
*) lte – improved modem initialization;
*) lte – show “primary-band” only for LTE modems;
*) lte – use /128 prefix for IPv6 address on LTE interface;
*) lte – use interface from RA when “ipv6-interface=none” and IPv6 enabled;
*) ppp – added 3GPP IoT “access-technology” definitions;
*) ppp – added support for Sierra WP7601;
*) ppp – disable DTR send when using at-chat;
*) quickset – added “LTE AP Dual” mode support;
*) quickset – added “LTE APN” dropdown support;
*) quickset – fixed “LTE Band” checkbox display;
*) route – fixed area range summary route installation in VRF;
*) routerboard – fixed default CPU frequency on RB750r2 (“/system routerboard upgrade” required);
*) routerboard – fixed USB configuration export on RBLtAP-2HnD;
*) routerboard – hide “memory-frequency” parameter for RBLtAP-2HnD;
*) sniffer – allow filtering by packet size;
*) snmp – added “disabled” and “comment” parameters for communities;
*) snmp – added option to monitor “link-downs” parameter using MIKROTIK-MIB;
*) snmp – fixed “dot1dBasePort” index offset for BRIDGE-MIB;
*) snmp – fixed “ifLastChange” OID reporting for IF-MIB;
*) snmp – fixed “radio-name” (mtxrWlRtabRadioName) OID support;
*) snmp – improved interface status reporting for IfOperStatus OID;
*) snmp – improved LLDP interface returned index and type;
*) snmp – return only interfaces with MAC addresses for LLDP;
*) snmp – use “src-address” also for traps;
*) ssh – fixed output printing when “command” parameter used;
*) supout – include information from all LTE interfaces;
*) supout – removed “file” option from “/system sup-output” command;
*) switch – added “comment” property for switch vlan menu (CLI only);
*) switch – correctly update dynamic switch rule when dhcp-snooping is enabled;
*) switch – ignore “default-vlan-id” property after switch reset on RTL8367 switch chip;
*) switch – show “external” flag for bridge hosts on MT7621, RTL8367 switch chips;
*) timezone – updated time zone database to version 2019c;
*) tr069-client – added CellDiagnostics parameter support;
*) tr069-client – added LTE band and cellular technology selection parameters;
*) tr069-client – added LTE RSCP, ECNO and ICCID parameter support;
*) tr069-client – added multiple LTE monitoring parameters;
*) tr069-client – reconnect to ACS when “ConnectionRequestURL” is updated;
*) upgrade – improved auto package updating using “check-for-updates”;
*) ups – improved compatibility with APC UPS’s;
*) usb – general USB modem stability improvements;
*) userman – updated Authorize.Net to use SHA512 hashing;
*) w60g – added “region” setting to limit allowed frequencies (CLI only);
*) w60g – do not reset link when changing comment on station;
*) w60g – fixed “monitor” command on disabled interfaces;
*) w60g – move stations to new bridge when “put-in-bridge” parameter is changed;
*) webfig – fixed link to Winbox download;
*) winbox – added “ip-address” and stats columns in “IP/Kid-Control/Devices” menu;
*) winbox – added “public-address-ipv6” parameter to “IP/Cloud” menu;
*) winbox – added “reset-counters” button to “IP/Kid Control/Devices” menu;
*) winbox – added “tx-info-field” parameter to “Wireless/W60G” menu;
*) winbox – added “Vendor Classes” tab in “IP/DHCP Server” menu;
*) winbox – added wireless alignment LED types to “System/LEDs” menu;
*) winbox – fixed allowed range for bridge filter “new-priority” parameter;
*) winbox – fixed “CAPs Scanner” stopping;
*) winbox – fixed “cluster-id” parameter setting in “Routing/BGP/Instances” menu;
*) winbox – fixed file locking when uploading multiple files at once;
*) winbox – fixed firewall limit parameter support for rates more than 4G;
*) winbox – fixed invalid flag presence in “IP/SMB/Shares” menu;
*) winbox – fixed “Routing” menu icon presence when there is no routing package installed;
*) winbox – improved stability when transfering multiple files between multiple windows;
*) winbox – properly show timestamp in file “Creation Time” field;
*) winbox – removed “Set CA Passphrase” button from “Certificate” menu;
*) winbox – renamed “Queue Limit” to “Queue Size” for “pcq-upload-default” and “pcq-download-default” parameters;
*) winbox – replaced “kb” with “KiB” in “Tools/Packet Sniffer” menu;
*) winbox – show “Switch” menu on RBwAPGR-5HacD2HnD;
*) winbox – show “System/RouterBOARD/Mode Button” on devices that have such feature;
*) wireless – added 4 chain MCS support for 802.11n wireless protocol (CLI only);
*) wireless – added “ETSI” regulatory domain information;
*) wireless – added “indonesia4” regulatory domain information;
*) wireless – added “push-button-5s” value for “wps-mode” parameter;
*) wireless – added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
*) wireless – allow using “canada2” regulatory domain on US lock devices;
*) wireless – fixed 802.11n rate selection when managed by CAPsMAN;
*) wireless – fixed RX chain selection;
*) wireless – fixed sensor MAC address reporting in TZSP header;
*) wireless – improved 802.11ac stability for all ARM devices with wireless;
*) wireless – improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
*) wireless – updated “ukraine” regulatory domain information;
*) wireless – updated “united-states” regulatory domain information;