Pro Tools Mixing and Mastering
Дата Выпуска: 30 Марта 2012
Производитель:
Lynda.com
Автор:
Brian Lee White
Продолжительность: 09h 31m
Тип раздаваемого материала: Видеоурок
Язык: Английский
Перевод на русский: НЕТ
Транскрипт: Еще не выпущен производителем
GUI: нет
Описание: After recording and editing a session, take advantage of the lessons in Pro Tools Mixing and Mastering to refine the final mix and master of your project. Avid Certified Expert and pro mix engineer Brian Lee White covers all the basic mixing tools that every producer and engineer should know, from using EQ to add clarity and focus to applying compression and limiting to control dynamics and maximize track levels within a mix. The course stresses the importance of creating a solid mixing plan and setting up the studio before beginning any work in Pro Tools. Throughout the course, Brian lends his insights, inspirations, and studio secrets from over a decade of professional mixing to help you become a better mixer.
Topics include:
What is mixing? Exploring the past, present, and future
Mixing “in the box”
Setting up monitors and ensuring proper acoustics in the studio
Staying organized with labels, memory locations, and window configurations
Working with the Pro Tools Mixer
Building healthy and profitable mixing habits when putting together a final mix
Using volume and pan to balance the mix
Employing corrective versus creative EQ strategies to create clarity and contrast
Knowing when and when not to process the audio of a track
Working with compressors and dynamics processors
Using saturation effects to capture an analog-type sound
Adding reverb and delay to create depth in a mix
Working with limiting and multiband compression during the mastering process
Dealing with plug-in delay and latency in a mix
Using the bundled plug-ins in Pro Tools to add clarity, punch, and width to a mix
Recording and editing automation to add drama and excitement
Using clip based gain to control headroom and gain staging
Содержание
Introduction 12m 48s
Welcome 01m 06s
What is mixing? The past, present, and future 04m 38s
Exploring strategies for mixing and mastering 05m 47s
Using the exercise files 01m 17s
1. Preparing to Mix 47m 04s
Mixing "in the box" 04m 45s
Setting up the studio: monitors 06m 24s
Setting up the studio: acoustics 06m 42s
Staying organized: labeling tracks and clips 11m 42s
Staying organized: memory locations and window configurations 09m 28s
Managing system resources during mixdown 08m 03s
2. Working with the Pro Tools Mixer 48m 42s
Introducing the Pro Tools mixer 03m 19s
Understanding mixer signal flow 03m 55s
Using inserts and plug-ins 08m 54s
Working with plug-in settings 05m 57s
Using sends and creating effects returns 09m 05s
Submixing with aux tracks 06m 04s
Using groups while mixing 05m 32s
Using master faders effectively 05m 56s
3. Mixing Tools and Strategies 18m 12s
Conceptualizing the mix and making a plan 06m 17s
Adjusting volume and pan to balance the mix 07m 49s
Knowing when to process: mix problems vs. mix solutions 04m 06s
4. Understanding and Using EQ (Equalization) 43m 54s
Understanding the mechanics of sound 03m 21s
Learning the basics of EQ: frequency-specific level control 03m 03s
Using DigiRack EQ 3 06m 42s
Exploring EQ strategies in mixing: correcting vs. creating 07m 19s
A working example: kick drum and bass 08m 22s
A working example: filtering loops 06m 02s
Exploring mixing tips and tricks: EQ 09m 05s
5. Understanding and Using Dynamics Processors 01h 23m
Understanding dynamics and dynamic range 01m 48s
Working with dynamics processors 02m 41s
Using the DigiRack Dyn 3 compressor/limiter 08m 36s
Balancing and shaping track dynamics 02m 42s
Using gates and expanders 08m 26s
Using de-essers to eliminate sibilance 06m 52s
A dynamics workflow example: vocal 12m 21s
A dynamics workflow example: drums 12m 19s
Exploring mixing tips and tricks: dynamics 10m 11s
Building parallel, or upward, compression 07m 40s
Reviewing dynamics concerns: How much is too much? 02m 45s
Using Avid Channel Strip 07m 26s
6. Mixing with Reverb, Delay, and Other Time-Based Effects 59m 21s
Using time-based effects to add depth and width 03m 49s
Exploring DigiRack D-Verb 15m 48s
Using the DigiRack delays 11m 10s
Mixing with reverb 11m 28s
Mixing with delays 10m 40s
Exploring mixing tips and tricks: creating mix depth 06m 26s
7. Introducing the Pro Tools Creative Collection 15m 14s
Working with the Creative Collection 07m 18s
Building distortion and saturation 07m 56s
8. Automating the Mix 56m 48s
Understanding automation 04m 10s
Recording real-time automation moves 09m 00s
Viewing and editing automation 13m 12s
Using clip gain 09m 59s
Automating plug-ins 09m 34s
Exploring automation strategies for mixing 10m 53s
9. Putting It All Together 39m 22s
Understanding the characteristics of a great mix 06m 23s
Working with a reference track 07m 51s
Avoiding common pitfalls 10m 59s
Building healthy mixing habits 03m 23s
Crafting your mix from start to finish 10m 46s
10. Mastering in Pro Tools 01h 06m
Understanding mastering 05m 13s
Working with general mastering strategies 09m 16s
Using limiting and compression to maximize track level 12m 06s
Working with multiband compression 05m 34s
Bouncing the mix 08m 04s
Understanding sample rate, bit depth, file formats, and dither 09m 00s
Metering with the DigiRack Phase Scope 07m 46s
Compressing audio for the web 10m 00s
11. Additional Topics 01h 19m
Evaluating plug-in processors 06m 03s
Using saturation and other analog-style effects effectively 11m 45s
Setting up side-chains 07m 27s
Master bus processing 11m 06s
Creating and using mix templates 10m 35s
Dealing with plug-in delay and latency 12m 28s
Drum sample replacing 12m 59s
Setting pan depth in Pro Tools 06m 39s
Conclusion 00m 21s
Thank you and goodbye 00m 21s
Файлы примеров: присутствуют
Формат видео: клипы QuickTime (.mov)
Видео: AVC 960x540 15fps ~200Kbps
Аудио: AAC 48kHz 2ch 96Kbps
